Daikin 5 Ton Air Conditioner 13 SEER 3 Phase 460V

Frequently Asked Questions

What is the Daikin DX13SA0604 and what applications is it designed for?

The Daikin DX13SA0604 is a 5-ton, 13 SEER commercial split-system air conditioner designed for 3-phase 460V power applications. It is engineered for large commercial and industrial environments that require reliable, high-capacity cooling — including warehouses, manufacturing facilities, commercial office buildings, retail spaces, greenhouses, and controlled-environment agriculture (CEA) grow rooms. The 3-phase 460V configuration is standard in commercial and industrial electrical systems, making this unit a natural fit for facilities already running 3-phase power. At 5 tons (60,000 BTU), it is capable of cooling large open spaces efficiently. It is AHRI Certified and ETL Listed, meeting all major commercial HVAC compliance standards including ASHRAE 90.1-2010.

What does 13 SEER mean, and is this unit energy efficient for commercial use?

SEER stands for Seasonal Energy Efficiency Ratio — it measures how efficiently an air conditioner converts electricity into cooling over an entire cooling season. A 13 SEER rating meets the federal minimum efficiency standard for commercial HVAC equipment and satisfies the performance requirements of ASHRAE Standard 90.1-2010, which governs energy efficiency in commercial buildings. For commercial operators, 13 SEER represents a solid baseline efficiency that balances upfront equipment cost with operating cost savings compared to lower-efficiency legacy systems. The Daikin DX13SA0604 features an energy-efficient compressor and copper tube / enhanced aluminum fin coil construction to maximize heat transfer efficiency and long-term reliability in demanding commercial environments.

What are the electrical requirements for the Daikin 5 Ton 3-Phase 460V air conditioner?

The Daikin DX13SA0604 requires a 3-phase, 460V power supply — a configuration standard in commercial and industrial facilities. This is distinct from residential or light commercial units that typically run on single-phase 208/230V power. Before installation, confirm that your facility has 3-phase 460V service available at the installation location. A licensed commercial HVAC technician and licensed electrician should perform all electrical connections, including proper grounding via the unit’s ground lug connection. The unit features a contactor with lug connection for field wiring. If your facility runs 208/230V single-phase power, this unit is also available in a 208/230V configuration — contact Seres Ag for availability.

Is the Daikin DX13SA0604 suitable for greenhouse and grow room climate control?

Yes. The Daikin 5-ton 13 SEER 3-phase unit is well-suited for large greenhouse and controlled-environment agriculture (CEA) grow room applications where consistent, high-capacity cooling is critical to crop health and yield. At 60,000 BTU of cooling capacity, it can manage the significant heat loads generated by high-intensity grow lighting (HPS, CMH, or LED), dehumidification equipment, and solar gain in greenhouse structures. The heavy-gauge galvanized-steel cabinet and corrosion-resistant Nickel Gray powder-paint finish provide durability in the humid, chemically active environments common in commercial growing facilities. For grow room applications, pair with appropriate dehumidification and ventilation equipment to achieve full climate control. Always consult a licensed HVAC engineer to size equipment correctly for your specific facility heat load.

Where can I buy the Daikin 5 Ton Air Conditioner 13 SEER 3 Phase 460V?

You can purchase the Daikin 5 Ton Air Conditioner 13 SEER 3-Phase 460V (Model DX13SA0604) directly from Seres Ag at seresag.com. Seres Ag is a trusted supplier of commercial HVAC equipment, climate control systems, and controlled-environment agriculture supplies for commercial growers, greenhouse operators, and facility managers. Ordering through seresag.com ensures you receive an authentic Daikin product with competitive pricing and access to Seres Ag’s knowledgeable support team. This unit is also available in a 208/230V configuration — contact Seres Ag to confirm availability and discuss the right configuration for your facility.