Milwaukee MW600 PRO Dissolved Oxygen Meter

Availability: Many In Stock
DESCRIPTION The Milwaukee MW600 PRO Portable Dissolved Oxygen meter is one of Milwaukee's most popular meters with...
Regular price
$218.28
Regular price
$261.94
Sale price
$218.28
Subtotal: $218.28

Lead Time

this products ships in 1-2 days

  • Seres

DESCRIPTION

The Milwaukee MW600 PRO Portable Dissolved Oxygen meter is one of Milwaukee's most popular meters with its reliable and fast operation as well as its accuracy.

The Milwaukee PRO DO Meter is preferred by people looking for lab level accuracy without the cost. The Milwaukee DO Meter is popular with everyone from field biologists and educators to fish farmers and koi pond owners.

DESIGN FEATURES

  • Fast, easy-to-read results with large digital LCD readout
  • Repeatable, accuracy to ±1.5% FS
  • Lightweight and portable
  • Simple 2 point open air calibration (see video below)
  • Uses MA840 reinforced polarographic probe with an oxygen-permeable polytetrafluroethylene (PTFE) membrane sensor
  • 5 o-rings, membranes and one protective cap included
  • 10 feet probe cable for extra flexibility when testing
  • 70 hours of battery life with continuous use (battery included) with low battery warning

CARE AND USE

“OPEN AIR” CALIBRATION PROCEDURE

1. Remove the membrane

Take the membrane off the end of the probe and dry the diode off.

 

2. Zero out the display

Connect the probe to the base unit and turn the unit on. Your display should read 0.0. If it does not, go to the position “0” screw on the front of the unit with the screw driver provided and through the access hole make the unit display read 0.0.

 

3. Fill the membrane

Go to the membrane and put the “O” ring inside the membrane on the shoulder at the base of the threads. Fill the membrane to just short of the “O” ring with MA9071 electrolyte solution. Be sure that there are no bubbles inside the membrane. (Air bubbles are the main cause of calibration failure)

 

4. Attach the membrane

Screw the membrane on to the probe.

 

5. Let stablize

Turn the meter on and hang the probe off the end of a table pointing down and let the unit display stabilize (this may take 5 to 15 minutes)


6. Adjust

Push down and hold the “Cal” button on the front face of the meter and with the screwdriver go to the front Cal position “100%” and make the display read 100.

 

You are now calibrated.

 

EXTRA TIPS

  • Watch for the membrane having wrinkles or stretch marks. If you see wrinkles, replace with a new membrane.
  • Always use fresh electrolyte solution (MA9071).

SPECIFICATIONS

  • O2 Range: 0.0 to 19.9 mg/L
  • O2 resolution: 0.1 mg/L
  • O2 Accuracy: ±1.5% Full Scale
  • Calibration: Manual on 2 points (zero and slope)
  • Temperature Compensation: Automatic, from 0 to 30°C
  • Probe: MA840 refillable polarographic probe included
  • Membranes: 5 included
  • Environment: 0 to 50°C / 32 to 122°F; max RH 95%
  • Battery Type: 1 x 9V alkaline (included)
  • Battery Life: Approx. 70 hours of continuous use
  • Dimensions: 5.7 x 3.1 x 1.6 inches
  • Weight: 7.5 ounces with battery
We ship daily from Monday through Friday, and shipments are processed within 24-48 hours of cleared payment.
Orders placed over the weekend are processed on the next business day.

Free Shipping

Specific Vendors offer free shipping over a certain amount. This will be automatically applied during checkout.

Orders over $10,000 before tax qualify for free shipping!

Free Shipping only applies to domestic US (lower 48 states -- sorry, Alaska & Hawaii) shipments.

Shipping Rates

Shipping rates are calculated during checkout based on the weight, dimensions, and destination of the ordered items. We do our best to calculate the exact cost.

Updated 5/1/2023:

Please note that due to the higher shipping costs and larger dimensions of some of our products, our shipping calculator may not always provide an accurate shipping estimate. In these cases, we will reach out to you with an updated shipping quote after you place your order. If you have any questions about shipping costs, please don't hesitate to contact us before placing your order. We apologize for any inconvenience and appreciate your understanding.

Seres reserves the right to notify you of any additional shipping charges. We partner with multiple vendors and locations, which can alter shipping rates. In addition, there are conditions out of our control (rural areas, fuel surcharge, multiple shipments). If this occurs, you will be contacted immediately and have the right to modify or cancel your order for a full refund. 

Address Change / Order Cancellation

If you need to change the shipping address, please get in touch with us at support@seresag.com or call 1-877-237-3754

Once the order is shipped, we will do our best to perform an address intercept. You will be charged an Intercept Fee imposed by the shipping carrier. This fee varies from each carrier. Please note not all shipping carriers will accept address intercept changes.

If an order is canceled in transit, you are solely responsible for all shipping charges incurred by the Shipping Carrier.

Shipping charges will not be refunded.

Tracking

Once an order has been shipped, we will send an email and text message on file with the tracking number. If your order is fulfilled from multiple vendors or locations, you will receive shipment confirmations with tracking for each shipment. 

In addition, you can check the status of your order through the order confirmation email or within your profile page under Track Order.

Freight (LTL)

Scheduled appointments deliver freight shipments. You are responsible for inspecting for damage incurred in transit and signing before the driver leaves. DO NOT accept the shipment if there is any damage. If your freight shipment arrives damaged, contact us immediately.

Once delivered, we cannot reimburse paid freight charges or refund products.

Some restrictions may apply; Hawaii and Alaska do not qualify for free shipping offers.

Damaged Shipment

It rarely happens, but once in a while, products are damaged during Shipping. Therefore, please scrutinize all shipments for damaged or missing items before signing for them (if required).

The shipping carrier is responsible for items damaged during Shipping, which will most often be UPS, FedEx, or USPS. 

If assistance is needed, please get in touch with us immediately. Seres cannot promise refunds or replacements if this is not done within 72 hours. 

By signing your name and accepting shipment for a Freight(LTL) order, you get no reimbursement of freight charges, order costs, or any other charges incurred.

Lead Times

Please note that there is up to a 7-day processing period for orders containing Hawthorne products.

Signature

Due to the valuable contents of many products we sell,  the carrier may need a signature upon delivery. Please understand that this is a measure our company took to ensure safe delivery and fraud protection.

Third-Party Carriers will attempt to deliver a signature-required order three times. 

Please follow up with the carrier for assistance if a missed-delivery note is received.

If assistance is needed, please get in touch with us, so we can help contact the carrier. 

Shipping costs will not be refunded for missed shipments.


Seres is not responsible for any missing, lost, or stolen items.
 

At this time, we do not ship to post office boxes or APO/FPO addresses.  

For more information, please read our Terms of Service.

Related Products

Recently Viewed Products